Is Industrial Automation a Good Major? Benefits, Career Paths and Industry Demand Explained

Is Industrial Automation a Good Major? Benefits, Career Paths and Industry Demand Explained

Short answer: Yes, industrial automation is a good career if you like PLCs, controls and machines that run on their own, and you already hold the right diploma. Demand for automation is growing in India, but hiring is cautious, so skills matter more than the label. NTTF’s industrial automation course is the Post Diploma in Industrial Automation (CP19): 1 year, 2 semesters, 70% hands-on. It is not open after 10th or 12th. You need an earlier diploma first.

Is industrial automation a good career in 2026?

FactSource
India installed a record 9,120 industrial robots in 2024, up 7%. It is now the sixth-largest market. Automotive took about 45%International Federation of Robotics, World Robotics 2025
India’s manufacturing PMI was 54.7 in October 2026. Employment rose only slightly, and capital goods producers cut staffS&P Global/HSBC, reported by KNN

Factories are buying more automation, and a lot of it goes to car makers and their suppliers. The robot count shows demand for automation, not the number of open jobs. Hiring is slow, and capital goods firms, which include many automation suppliers, are cutting staff. A student who can program a PLC and fix a drive is easier to hire than one who only has a certificate.

Who can join the post diploma in industrial automation?

The Post Diploma in Industrial Automation (CP19) is a post diploma, so it comes after another qualification.

ItemDetails
EligibilityDiploma in Electrical, Electronics, Mechatronics or Instrumentation, or a B.Sc. in Electronics
Age limitNone
Not listedMechanical diploma, Electronics and Communication diploma, other degrees. If you hold one of these, ask admissions in writing
Duration1 year, 2 semesters
EntranceAn entrance exam, with a free mock test on the site
FeeCharged per semester. No amount is published. See the brochure
RecognitionNTTF states recognition by NCVET, MSDE and NOCN UK
CampusesElectronic City (Bengaluru) and Trichy, per the page. The enquiry form lists only Electronic City

If you are after 10th or 12th and want this route, take a diploma first. At NTTF, the diplomas that lead into CP19 are the Electrical and Electronics Systems diploma (CP23), the Electronics and Embedded diploma (CP04) and the Mechatronics and Smart Factory diploma (CP15). A mechanical diploma is not on the list. If that is yours, the Post Diploma programs page shows the other options, and Post-Diploma vs Jumping Straight Into a Job helps you decide whether to study more or start working.

What does the CP19 post diploma teach?

NTTF lists nine subjects and gives no semester split.

SubjectWhat it builds
Pneumatics and HydraulicsFluid-power control. See Hydraulics and Pneumatics: A Complete Guide
Electrical TechnologyThe electrical base for controls and drives
PLC and Plant NetworkProgramming controllers and linking them across a plant
Process Control InstrumentationMeasuring and controlling process variables
SCADAMonitoring and controlling a plant from a screen
Industrial Equipment MaintenanceKeeping automated equipment running
Automated Production SystemsHow automated lines fit together
Industrial RoboticsWorking with industrial robots
DCS Practical Project on AutomationA hands-on project on a distributed control system

The page says the course is 70% hands-on per NTTF’s team and uses PLCs, PC-based data acquisition, SCADA, variable frequency drives, robotics and simulation tools. It names no PLC brand, SCADA software or robot, so ask the centre which ones you will use.

Which jobs does it lead to?

NTTF’s page lists six roles. This table shows the subjects behind them.

RoleSubjects behind it
PLC ProgrammerPLC and Plant Network, Electrical Technology
SCADA EngineerSCADA, DCS Practical Project
Automation EngineerPLC and Plant Network, SCADA, Automated Production Systems
Automation TechnicianIndustrial Equipment Maintenance, Pneumatics and Hydraulics
Industrial Robotics TechnicianIndustrial Robotics, Automated Production Systems
Process Control EngineerProcess Control Instrumentation, DCS Practical Project

NTTF states a 98%+ placement record for CP19 and shows 44 recruiter logos, including Bosch, Fanuc, Schneider, BHEL, Tata Power and Toyota Kirloskar. Logos show who has recruited from NTTF, not who hires CP19 every year. The Placements page lists 500+ recruiting companies and an average package of about ₹3.5 to ₹4 lakh a year across all programs, not CP19 alone. NTTF publishes no CP19 pay, so ask the centre for the last batch: companies, roles and pay. For the old, wider overview of the course, see Robotics, PLC, and SCADA: Mastering Industrial Automation After Diploma.

What should you check before joining?

CheckWhy
Your diploma is on the eligibility listA mechanical or Electronics and Communication diploma is not listed
Which PLC brands and SCADA software the lab usesThe page names none, and employers ask
The fee in the brochureIt is charged per semester and not published
The last batch’s placementsThe 98%+ is a program-wide figure
Which campus runs your batchThe page and the enquiry form disagree

Frequently asked questions

Is industrial automation a good career in India?

Yes, if you like controls and machines and can program a PLC. India installed a record 9,120 industrial robots in 2024, but hiring is cautious, so practical skills decide who gets picked.

Can I join the post diploma in industrial automation after 12th?

No. CP19 needs a diploma in Electrical, Electronics, Mechatronics or Instrumentation, or a B.Sc. in Electronics. After 12th, start with a diploma such as CP23, CP04 or CP15.

Do I need PLC experience before joining?

The CP19 page lists no PLC experience requirement. It does list a diploma in a related branch, so you need the electrical or electronics base. PLC and Plant Network is one of the nine subjects you study.

Can a mechanical diploma holder join?

The page does not list a mechanical diploma. Ask admissions in writing before you plan on it. The Post Diploma in Tool Design (CP05) is the post diploma that accepts a mechanical diploma.

Industrial automation is a good career for students with the right diploma who enjoy controls and hands-on work, and CP19 is NTTF’s route into it. It is the wrong plan for anyone who still needs a diploma or holds one that the page does not list. Check your eligibility first, then look at the Post Diploma in Industrial Automation (CP19). If you want a feeder diploma, browse all diploma programs.

Recent Articles

Your Guide to the Best diploma in manufacturing technology for a Hands-On Career
Read More
Future Scope and Career Options After Diploma in Electrical Engineering?
Read More
Is an electrical diploma course Still Worth It in the Age of Automation
Read More

Quick Enquiry

Quick Enquiry